You are here: Home > SUSPENSION & Steering > Triple Clamps & Steering Dampers
Sort By:
Page of 1
Cable Guide, Scotts
Our Price: $22.95
WP Comp/Reb Knobs
Our Price: $28.95
CSE Scotts Submount Cable Guide
The submount Cable Guide is a must-have for KTMís and Husabergís using Scotts submount, steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, handlebar clamp and handlebars preventing wear and cable snags that could eventually lead to an expensive, inconvenient or dangerous failure.
The Submount Cable Guides are machined from a wear resistant, tough copolymer plastic.  All mounting hardware is stainless steel to prevent corrosion.  Installation time is less than five minutes.



The Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
These knobs replace the factory compression or rebound knobs on WP forks on the 690 as well as the new 1190 ADV-R. The CSE knobs are machined from aluminum to make them much more durable than the stock plastic knobs.  The shape of the knob has also been optimized to make adjustments easier.  They will also give your bike a custom look. The CSE Cable Guide is a must-have for KTMís and Husabergís using standard, bar-mount steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, stabilizer adjustment knobs, handlebar clamp and handlebars preventing wear and cable snags that could lead to an expensive, inconvenient or dangerous failure.

The CSE Cable Guides are machined from billet 6061 Aluminum.  They can be purchased with a machined surface or anodized orange or black.  All mounting hardware is 18-8 stainless steel to prevent corrosion.  Installation time is less than five minutes using the included hex wrench.

The CSE Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
The CSE Cable Guide is a must-have for KTMís and Husabergís using standard, bar-mount steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, stabilizer adjustment knobs, handlebar clamp and handlebars preventing wear and cable snags that could lead to an expensive, inconvenient or dangerous failure.

The CSE Cable Guides are machined from billet 6061 Aluminum.  They can be purchased with a machined surface or anodized orange or black.  All mounting hardware is 18-8 stainless steel to prevent corrosion.  Installation time is less than five minutes using the included hex wrench.

The CSE Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
Brake pedal for the KTM 690e/690r that replaces the stock unit that is known to bend and break easily. Our pedal is machined from billet aluminum and has a significantly larger cross section. We've also replaced the factory pivot bushings with two sealed ball bearings for a smoother action and longer life.

-The 2008-10 pedal (1016-0001) is designed to work with the '09-'10 style pivot bolt
(KTM P/N 76513057100) which is not included. This is an upgrade for '08 models so you will need the pivot bolt. You can select the "690 Brake Lever pivot" option on this page or order from your KTM dealer.

-The 2011+ pedal (1016-0002) use the stock bolt.

-Both versions of the pedal can use the stock foot pad tip. If you want a larger tip, select the "KTM Rally Factory Replica Tip" option. Please note that if you select this option it may delay your order depending on if the part is in stock at our warehouse or if we need to order from KTM. There are NO returns on this special order option!