You are here: Home > KTM > 950 > Super Enduro
Sort By:
Page of 1
NGK Iridium CR8EIX Enduro Fender Bag ADVmachines™ KTM SAS Blank Plate
NGK Iridium CR8EIX
Our Price: $11.00
Enduro Fender Bag
Our Price: $18.00
FOR THE 950 ONLY the 990 uses a different plug!

Iridium IX® The Spark Plug Serious Enthusiasts Rely On Designed specifically for the performance enthusiast. Iridium IX® offers extreme ignitability, improved throttle response and superior anti fouling
  • Fine Iridium tip ensures high durability and a consistently stable spark
  • Iridium alloy has extremely high melting point, perfect for today’s high-tech, high-performance engines
  • Trivalent Metal Plating - superior anti-corrosion and anti-seizing properties
  • Outstanding acceleration, high fuel efficiency and durability
  • Ultimate design, technology and performance.
Enduro Fender Bag

By utilizing 1” webbing and heavy duty hooks, Ballistics nylon and Tough-Tek, Wolfman is offering a stable and durable bag to carry your spare tubes and tire irons. Tested on the grueling Colorado 500, this bag stays put.
Set of two ADVmachines™ plates to block off the SAS ports on the side of the 690/950/990/1190/RC8 engine for testing. Precision CNC Laser cut from .187 6061 aluminum.
Cable Guide, Scotts LC8 Oil Filter Double Take Mirror
Cable Guide, Scotts
Our Price: $22.95
LC8 Oil Filter
Our Price: $22.98
Double Take Mirror
List Price: $25.00
Our Price: $25.00
CSE Scotts Submount Cable Guide
The submount Cable Guide is a must-have for KTM’s and Husaberg’s using Scotts submount, steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, handlebar clamp and handlebars preventing wear and cable snags that could eventually lead to an expensive, inconvenient or dangerous failure.
The Submount Cable Guides are machined from a wear resistant, tough copolymer plastic.  All mounting hardware is stainless steel to prevent corrosion.  Installation time is less than five minutes.



The Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
Factory OEM paper filter, High quality stuff.  Will fit all 950 and 990 Adventure, 950 Super Enduro, 950 Supermoto, 990 Super Duke, RC8 Mirrors for the discerning road to dirt freaks and everyone else too!  These mirrors WORK!  No more loose floppy joints, or tools to adjust and tighten.  You can even SEE through this mirror when you are riding unlike some of the other light weight solutions that are only intended to cover your legal requirement to have a mirror.

Choose your arm and mount options based upon your application, check the Technical Description for more details.  If you are looking to mount it to a KTM 950/990 then go for either the Long or Short arm and the Ball Stud.Indestructible- Made from reinforced Zytel

Excellent visibility- SAE spec convex lens
Facet pump adapter plate Cable Guide, 9/16" post, Plain Cable Guide, 1/2" post, Plain
Facet pump adapter plate
Our Price: $25.50
This CNC milled 6061 aluminum adapter plate allows the installer to directly bolt in a Facet 40171 fuel pump in place of the OEM Mitsubishi pump on the SuperEnduro and SuperMoto tank without modifying the flanges on the Facet pump.  Requires 2 (two) 6mm x 10mm bolts, Facet pump, fuel filter, electrical connectors, pipe and/or tubing fittings to complete the conversion. The picture shown is a example of a finished installation. The CSE Cable Guide is a must-have for KTM’s and Husaberg’s using standard, bar-mount steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, stabilizer adjustment knobs, handlebar clamp and handlebars preventing wear and cable snags that could lead to an expensive, inconvenient or dangerous failure.

The CSE Cable Guides are machined from billet 6061 Aluminum.  They can be purchased with a machined surface or anodized orange or black.  All mounting hardware is 18-8 stainless steel to prevent corrosion.  Installation time is less than five minutes using the included hex wrench.

The CSE Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
The CSE Cable Guide is a must-have for KTM’s and Husaberg’s using standard, bar-mount steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, stabilizer adjustment knobs, handlebar clamp and handlebars preventing wear and cable snags that could lead to an expensive, inconvenient or dangerous failure.

The CSE Cable Guides are machined from billet 6061 Aluminum.  They can be purchased with a machined surface or anodized orange or black.  All mounting hardware is 18-8 stainless steel to prevent corrosion.  Installation time is less than five minutes using the included hex wrench.

The CSE Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
CPR Rottweiler Prefilter AFAM 525 CS Sprocket 16T AFAM 525 CS Sprocket 17T
CPR Rottweiler Prefilter
Our Price: $29.95
AFAM 525 CS Sprocket 16T
Our Price: $36.95
AFAM 525 CS Sprocket 17T
Our Price: $36.95
Dramatically increase filter service intervals with our pre filter skins. Available in standard 40 cell (red) or 60 cell (dark grey). The 40 is more 'coarse' foam where the 60 is more 'fine'.  Both will provide additional protection, the 60 will become 'plugged' sooner, however if running in fine silt/dust everyday we recommend the 60 provided it can be cleaned everyday.  Multiple pre oiled units can be swapped out in minutes without removing the base filter and are cleaned much easier as well. Afam's steel sprockets aren't just stock replacement products. Besides a broad range of alternative gear ratio's, the quality of Afam steel sprockets exceeds the OEM quality. All countershaft sprockets are made of superior quality case hardened alloy steel for extreme strenght and wear resistance. Fits all models of the KTM LC8, 950/990

16 Tooth count
Afam's steel sprockets aren't just stock replacement products. Besides a broad range of alternative gear ratio's, the quality of Afam steel sprockets exceeds the OEM quality. All countershaft sprockets are made of superior quality case hardened alloy steel for extreme strenght and wear resistance. Fits all models of the KTM LC8, 950/990

17 tooth count
AFAM 525 Rear Sprocket 42T AFAM 525 Rear Sprocket 45T Facet Fuel Pump
Facet Fuel Pump
Our Price: $59.98
Afam's steel sprockets aren't just stock replacement products. Besides a broad range of alternative gear ratio's, the quality of Afam steel sprockets exceeds the OEM quality. All countershaft sprockets are made of superior quality case hardened alloy steel for extreme strenght and wear resistance. Fits all models of the KTM LC8, 950/990

42 tooth count
Afam's steel sprockets aren't just stock replacement products. Besides a broad range of alternative gear ratio's, the quality of Afam steel sprockets exceeds the OEM quality. All countershaft sprockets are made of superior quality case hardened alloy steel for extreme strenght and wear resistance. Fits all models of the KTM LC8, 950/990

45 tooth count
Solid State fuel pump, replaces the KTM OEM unit that is prone to failures.
Oberon KTM LC8 Clutch Slave mount plate Jetting Package FlexJet2
Jetting Package
Our Price: $89.00
Sale Price: $84.00
You save $5.00!
FlexJet2
Our Price: $99.90
Mounting plate for all LC8 KTM Slave Cylinders, this product replaces the OEM plastic version. The Billet aluminium version produced by Oberon Performance will improve the mounting of either the original Slave Cylinder or the Oberon replacement KTM Clutch Slave Cylinder. Additionally due to the natural heat dissipation of the alloy used in the plate, a cooler running condition will prevail allowing a better clutch operation and more reliable performance.
Note: You must retain the original spacers from your plastic backing plate and insert them into this mounting plate to complete the assembly.
Baseline kit to support a Prefilter on a OEM airbox. Idle Mixture Fuel screw (IMS) adjustments can be a time consuming project. Once installed, R&D Flex-Jet2 makes tuning a simple and easy project. With the Flex-Jet2, Idle Mixture adjustments are now at your fingertips! If you ride from your garage elevation up or down, across a pass or out to your favorite place to ride that is 3-4k feet different, proper tuning is now quick and easy! Fits: 2003 thru Current ADVENTURER 950, SUPERMOTO 950 AND SUPER ENDURO 950

Install Documentation located here
Quick disconnect tank interface Jetting Package PLUS Pre-Filter Jetting Package, Pre-Filter PLUS FilterSkins
Jetting Package PLUS Pre-Filter
Our Price: $126.00
Sale Price: $116.00
You save $10.00!
Jetting Package, Pre-Filter PLUS FilterSkins
Our Price: $140.00
Sale Price: $129.00
You save $11.00!

Designed to work with KTM fuel injected or carbureted 950/990/1190 bikes.  This simple Quick-Connect Fuel Tap can be a life saver on the trail.  With the simple press of a button the two halves separate and seal, preventing loss of fuel and helping keep your bike safe and clean.  360 degree rotation allows a perfect alignment of your fuel lines.  Simple installation and no-tool operation.  Also fits most single cylinder carbureted KTM’s and Husaberg’s.

Sold as 1 per box, so if your bike has multiple fuel taps, order as many as you need

ADVmachines™ Jetting AND Pre-Filter solution for the 950.
This is the Jetting AND Pre-Filter AND Filter Skins solution for the 950 Adventure, Super Enduro, Super Moto. Includes 2 specific length hoses to vent the carburetor bowls that replaces the Y. The prefilter is factory oiled and ready for use. What are "FilterSkins"? They are a package of 3 nylon "skins" that go over the Pre-Filter. They allow you to field "clean" a Pre-Filter by removing it and replacing with another.
Jetting Package, Pre-Filter, FilterSkins PLUS Install DVD DID 525 VM2 Factory KTM Rally Pegs
Jetting Package, Pre-Filter, FilterSkins PLUS Install DVD
Our Price: $157.00
Sale Price: $144.00
You save $13.00!
DID 525 VM2
Our Price: $152.00
Factory KTM Rally Pegs
Our Price: $165.00
This is the Jetting AND Pre-Filter AND Filter Skins PLUS the installation DVD solution for the 950 Adventure, Super Enduro, Super Moto. Includes 2 specific length hoses to vent the carburetor bowls that replaces the Y. The prefilter is factory oiled and ready for use. What are "FilterSkins"? They are a package of 3 nylon "skins" that go over the Pre-Filter. They allow you to field "clean" a Pre-Filter by removing it and replacing with another.
This is the correct choice for the KTM 990 and 950.  Excellent quality chain!  Couple this with a AFAM front and rear sprocket and you will be running for another 15k miles!

D.I.D CHAIN DID 525VM2-120 X-RING GLD/BLK 525VM2-120 LINK.
Factory KTM Rally Pegs!

Recently made available in the US, these pegs used to be only available in Europe and they were about twice as much.

The pegs are slightly wider, longer and serrations are more aggressive than the OEM pegs that are fit to almost all of the KTM motorcycles. Known to fit the 690, 950 and 990. Will most likely fit the 400-530s as well. These pegs make a significant difference when installed on the 950/990 when the going gets technical, leverage is greater so pressure at the peg has greater effect on the bike. They also give the rider more room to move around on the bike. Additionally, the increased area of the peg spreads the forces out on the boot sole to make them a "stand all day" kind of deal.

Pegs are VERY high quality forged stainless and will fit onto the bike in minutes!
Oberon KTM LC8 Clutch Slave FPracing Tactical Lever Set Jetting Package & Pre-Filter & FlexJet2
Jetting Package & Pre-Filter & FlexJet2
Our Price: $227.00
Sale Price: $212.72
You save $14.28!
KTM LC8 Clutch Slave Cylinder

Oberon Performance clutch slave cylinder for LC8 KTM. Designed to improve the efficiency and looks of the original clutch slave cylinder for LC8 engines. The enhanced 27mm piston reduces the heaviness of the original clutch action and brings much relief to aching arms. The internal piston design, seals and breather hole have been drastically enhanced to prevent leaks and leave a smoother clutch action. CNC machined from T6 billet alloy for lightness, strength and eye-catching looks. Seven fantastic colours to choose from. Everything you need is included in the kit including full instructions and is ready to fit.

Our piston seals are manufactured from special Viton rubber which is frozen and then CNC machined with a 'U' profile which is specifically for hydraulic use, in addition the piston itself is guided by our unique back-plate to prevent piston wear and maintain correct alignment within the slave unit, and this ultimately gives a smoother lever action and prolongs product life. The piston is also larger than the original (OEM) to reduce lever effort, further increasing feel and reducing rider fatigue. We welcome customer feedback to aide further product improvement should you feel relevant.
Bi-folding "Tactical Pivot Technology.  In the event of a crash or falling over, the lever will deflect up or down preventing damage to vital components. These levers replace the OEM units will zero machining and allow a greater range of adjustment in addition to the lever deflection. ADVmachines™ Jetting, Pre-Filter AND FlexJet2 solution for the 950
CPR Rottweiler Intake Rottweiler "DOME" Intake BajaDesigns 8" HID
CPR Rottweiler Intake
Our Price: $299.00
Rottweiler "DOME" Intake
Our Price: $349.00
BajaDesigns 8" HID
Our Price: $474.95
Introducing the new leader in KTM LC8 engine induction systems, The "Rottweiler Intake System" Born from the need for an induction system that utilizes a multi layer foam element on all sides of the filter including the top, not just the sides, the "Rottweiler" intake system is the most cost efficient way to substantially increase the horsepower in your KTM Adventure 990/950, Super Duke, Super Duke R, 950 Super Enduro R, 990 Super Moto R, and any KTM using the venerable LC8 fuel injected engine. Initial Dyno runs show increases of 10% over stock even with the stock exhaust on our current 2008 Super Duke model. Similar gains can be seen on any of the LC8 equipped KTM's with a proper map.The rush of power compared to stock is night and day, you won't believe the difference!
FILTERS are IN STOCK!

Introducing the new leader in KTM LC8 engine induction systems, The "Rottweiler DOME Intake System" specifically for the KTM 950 Super Enduro. Born from the need for an induction system that utilizes a multi layer foam element on all sides of the filter including the top, not just the sides, the "Rottweiler" intake system is the most cost efficient way to substantially increase the horsepower in your KTM 950, Super Duke, Super Duke R, 950 Super Enduro R, 990 Super Moto R. Initial Dyno runs show increases of 10% over stock even with the stock exhaust on our current 2008 Super Duke model. Similar gains can be seen on any of the LC8 equipped KTM's with a proper jetting or mapping.The rush of power compared to stock is night and day, you won't believe the difference!
Part #61-0011 comes with:
-Single light frame made of 1/2" Chromoly-Steel alloy.
-Complete mounting kit with receiver brackets and rubber isolated clamps. Works on all size forks.
-Generation 5 HID bulb and ballast.
-All HID components are mounted internally and protected by a strong nylon backing.
-Clear Lexan rock guard.