You are here: Home > KTM > 690 LC4
Sort By:
Page of 1
Cable Guide, Scotts
Our Price: $22.95
Double Take Mirror
List Price: $25.00
Our Price: $25.00
Set of two ADVmachines™ plates to block off the SAS ports on the side of the 690/950/990/1190/RC8 engine for testing. Precision CNC Laser cut from .187 6061 aluminum. CSE Scotts Submount Cable Guide
The submount Cable Guide is a must-have for KTM’s and Husaberg’s using Scotts submount, steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, handlebar clamp and handlebars preventing wear and cable snags that could eventually lead to an expensive, inconvenient or dangerous failure.
The Submount Cable Guides are machined from a wear resistant, tough copolymer plastic.  All mounting hardware is stainless steel to prevent corrosion.  Installation time is less than five minutes.



The Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
Mirrors for the discerning road to dirt freaks and everyone else too!  These mirrors WORK!  No more loose floppy joints, or tools to adjust and tighten.  You can even SEE through this mirror when you are riding unlike some of the other light weight solutions that are only intended to cover your legal requirement to have a mirror.

Choose your arm and mount options based upon your application, check the Technical Description for more details.  If you are looking to mount it to a KTM 950/990 then go for either the Long or Short arm and the Ball Stud.Indestructible- Made from reinforced Zytel

Excellent visibility- SAE spec convex lens
Enduro Fender Bag
Our Price: $27.99
WP Comp/Reb Knobs
Our Price: $28.95
Enduro Fender Bag

By utilizing 1” webbing and heavy duty hooks, Ballistics nylon and Tough-Tek, Wolfman is offering a stable and durable bag to carry your spare tubes and tire irons. Tested on the grueling Colorado 500, this bag stays put.
These knobs replace the factory compression or rebound knobs on WP forks on the 690 as well as the new 1190 ADV-R. The CSE knobs are machined from aluminum to make them much more durable than the stock plastic knobs.  The shape of the knob has also been optimized to make adjustments easier.  They will also give your bike a custom look. The CSE Cable Guide is a must-have for KTM’s and Husaberg’s using standard, bar-mount steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, stabilizer adjustment knobs, handlebar clamp and handlebars preventing wear and cable snags that could lead to an expensive, inconvenient or dangerous failure.

The CSE Cable Guides are machined from billet 6061 Aluminum.  They can be purchased with a machined surface or anodized orange or black.  All mounting hardware is 18-8 stainless steel to prevent corrosion.  Installation time is less than five minutes using the included hex wrench.

The CSE Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
Mduro KTM 690 Boot Guard
Our Price: $92.98
Sale Price: $88.98
You save $4.00!
The CSE Cable Guide is a must-have for KTM’s and Husaberg’s using standard, bar-mount steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, stabilizer adjustment knobs, handlebar clamp and handlebars preventing wear and cable snags that could lead to an expensive, inconvenient or dangerous failure.

The CSE Cable Guides are machined from billet 6061 Aluminum.  They can be purchased with a machined surface or anodized orange or black.  All mounting hardware is 18-8 stainless steel to prevent corrosion.  Installation time is less than five minutes using the included hex wrench.

The CSE Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.
Presently ON ORDER WITH Mduro, place order now to ensure that you get one of the next batch!

Mduro™ KTM 690 Boot guard kit is CNC milled and hard anodized aircraft grade aluminum alloy, its function goes beyond the technical! Design factors are similar to the Rear Brake master cylinder for the KTM 950/990.

Designed to work with KTM fuel injected or carbureted 950/990/1190 bikes.  This simple Quick-Connect Fuel Tap can be a life saver on the trail.  With the simple press of a button the two halves separate and seal, preventing loss of fuel and helping keep your bike safe and clean.  360 degree rotation allows a perfect alignment of your fuel lines.  Simple installation and no-tool operation.  Also fits most single cylinder carbureted KTM’s and Husaberg’s.

Sold as 1 per box, so if your bike has multiple fuel taps, order as many as you need

Factory KTM Rally Pegs
Our Price: $165.00
ADVmachines.com exclusive part, Designed and Manufactured in Texas USA by a high precision machine shop utilizing CNC machining from aircraft grade 6061-T651 aluminum billet.  Anodized by one of the few shops that can get KTM orange right!  This part easily out performs other versions built by other manufacturers.  Color options are Orange and Black.
Factory KTM Rally Pegs!

Recently made available in the US, these pegs used to be only available in Europe and they were about twice as much.

The pegs are slightly wider, longer and serrations are more aggressive than the OEM pegs that are fit to almost all of the KTM motorcycles. Known to fit the 690, 950 and 990. Will most likely fit the 400-530s as well. These pegs make a significant difference when installed on the 950/990 when the going gets technical, leverage is greater so pressure at the peg has greater effect on the bike. They also give the rider more room to move around on the bike. Additionally, the increased area of the peg spreads the forces out on the boot sole to make them a "stand all day" kind of deal.

Pegs are VERY high quality forged stainless and will fit onto the bike in minutes!
Brake pedal for the KTM 690e/690r that replaces the stock unit that is known to bend and break easily. Our pedal is machined from billet aluminum and has a significantly larger cross section. We've also replaced the factory pivot bushings with two sealed ball bearings for a smoother action and longer life.

-The 2008-10 pedal (1016-0001) is designed to work with the '09-'10 style pivot bolt
(KTM P/N 76513057100) which is not included. This is an upgrade for '08 models so you will need the pivot bolt. You can select the "690 Brake Lever pivot" option on this page or order from your KTM dealer.

-The 2011+ pedal (1016-0002) use the stock bolt.

-Both versions of the pedal can use the stock foot pad tip. If you want a larger tip, select the "KTM Rally Factory Replica Tip" option. Please note that if you select this option it may delay your order depending on if the part is in stock at our warehouse or if we need to order from KTM. There are NO returns on this special order option!
KTM Preload Adjuster
Our Price: $179.00
Direct replacement of the stock fork caps on the KTM 690 to allow preload adjustment.  Comes as a set of two caps. KTM LC4 Clutch Slave Cylinder
Replaces (OEM Part) 75032061044

Oberon Performance clutch slave cylinder for KTM LC4. Designed to improve the efficiency and looks of the original clutch slave cylinder for LC4 engines. The enhanced 27mm piston reduces the heaviness of the original clutch action and brings much relief to aching arms. The internal piston design, seals and breather hole have been drastically enhanced to prevent leaks and leave a smoother clutch action. CNC machined from T6 billet alloy for lightness, strength and eye-catching looks. Seven fantastic colours to choose from. Everything you need is included in the kit including full instructions and is ready to fit.

Our piston seals are manufactured from special Viton rubber which is frozen and then CNC machined with a 'U' profile which is specifically for hydraulic use, in addition the piston itself is guided by our unique piston guide to prevent wear and maintain correct alignment within the slave unit, and this ultimately gives a smoother lever action and prolongs product life. The piston is also larger than the original (OEM) to reduce lever effort, further increasing feel and reducing rider fatigue.
Bi-folding "Tactical Pivot Technology.  In the event of a crash or falling over, the lever will deflect up or down preventing damage to vital components. These levers replace the OEM units will zero machining and allow a greater range of adjustment in addition to the lever deflection.
Expedition Dry Saddle Bags
Our Price: $259.99
BajaDesigns 8" HID
Our Price: $474.95
Expedition Dry Saddle Bags New for 2010!
Wolfman went all out to create the new Expedition Dry Saddlebags. We designed these bags to be durable and 100% waterproof, for the most adventurous and aggressive riders around. We started with burly 22 ounce and 34 ounce vinyl, and used cutting edge Radio Frequency technology for completely sealed seams. Next, we developed an ultra-stable mounting system. These sturdy bags attach to our proprietary Wolfman Side Racks with what is possibly the easiest mounting system available.
Part #61-0011 comes with:
-Single light frame made of 1/2" Chromoly-Steel alloy.
-Complete mounting kit with receiver brackets and rubber isolated clamps. Works on all size forks.
-Generation 5 HID bulb and ballast.
-All HID components are mounted internally and protected by a strong nylon backing.
-Clear Lexan rock guard.