This CNC milled 6061 aluminum adapter plate allows the installer to directly bolt in a Facet 40171 fuel pump in place of the OEM Mitsubishi pump on the SuperEnduro and SuperMoto tank without modifying the flanges on the Facet pump.  Requires 2 (two) 6mm x 10mm bolts, Facet pump, fuel filter, electrical connectors, pipe and/or tubing fittings to complete the conversion. The picture shown is a example of a finished installation.

• Suggested parts list:
• 1 Facet 40171 pump
• 1 1/8" NPT 90deg.
• 2 1/8" NPT 45 deg.
• 1 1/8" NPT male on both ends short
• 1 1/8" NPT female x 5/16" barb
• 1 5/16" barb on both ends
• 9" 5/16" fuel line
• 3 small hose clamps
• 2 M6 x 10 bolts
• 1 adapter plate
• 2 butt splices
• and a few wire ties.